Elithion Lithiumate manual - Install - column small cylindrical cell board, split bank

	Index Quick 1: Plan 2: Install 3: Set-up 4: Test Reference Help Forum
	index install install_cell_board_small_cyl_column_split_bank Install - column small cylindrical cell board, split bank Installation and wiring instructions for multiple bank cell boards for small cylindrical cells in a column You MUST disconnect the battery from EVERYTHING else before installing a cell board. Use a safety disconnect to open the battery circuit. A cell board WILL be damaged if installed to a battery that is still connected to a load or a charger. A cell board WILL be damaged if connected backwards to a cell, even for a split second. If a cell board is damaged, discard it. A DAMAGED CELL BOARD WILL DRAIN ITS CELL! Warning. Li-Ion batteries are dangerous! Wear safety glasses. Do not allow conductive objects (tools, solder...) to come into contact with cells or Cell Board Do not touch more than one battery connection at the same time Good technique Unfortunately, we do not have the resources to teach all of our clients proper assembly procedures, which are essential for a succesful project. What we can do is pass along this info to you: Proper tools Proper crimping technique from Molex Completion. Repeat with the remaining banks

© 2008~2012 Elithion™, LLC. All rights reserved, except where noted by CC mark. Handcrafted on 2/18/10 by Davide, graphic design by morninglori
The Elithion brand and the 'ə' (upside down 'e') logo are Trademarks of Elithion LLC.
Contact us

In this page:

Warning.
Good technique
Completion.

You MUST disconnect the battery from EVERYTHING else before installing a cell board.

Use a safety disconnect to open the battery circuit.

A cell board WILL be damaged if installed to a battery that is still connected to a load or a charger.

A cell board WILL be damaged if connected backwards to a cell, even for a split second.

If a cell board is damaged, discard it.

A DAMAGED CELL BOARD WILL DRAIN ITS CELL!