logo

Lithiumate™ Manual

index reference menu_home menu_password

Password Menu

Menu on setting and entering a password in the BMS.

Password menu (click on a menu item to go to a description of that item):

back to topIntro

A password may be required to program and test the BMS controller:

  • If no password is set, you may freely change all the settings
  • If a password is set, but you have not entered it, none of your chahges will take effect
  • If a password is set, and you have entered it, you may freely change all the settings

Notes:

  • Regardless, you will be able to look at all the settings
  • By default, the password is not set.
  • The password also affects the ability to force output lines
back to topEnter password to log-in

To log-in:

  • From the home menu, press 5 for "Password", 1 for "Enter pasword"
  • Type in the password: a number between 1 and 65535
  • Press the "Enter" key
back to topSet, change or remove the password

To set a password for the 1st time:

  • From the home menu, press 5 for "Password", 2 for "Set pasword"
  • Type in the password: a number between 1 and 65535
  • Press the "Enter" key

To change the password:

  • Log in (see above)
  • From the home menu, press 5 for "Password", 2 for "Set password"
  • Type in the new password: a number between 1 and 65535
  • Press the "Enter" key

To remove the password:

  • Log in (see above)
  • From the home menu, press 5 for "Password", 2 for "Set password"
  • Type in "0" for the new password
  • Press the "Enter" key

If you lost the password, you will have to get Tech Support to repair the BMS controller.

e-logo

© 2008~2017 Elithion™, LLC. All rights reserved, except where noted by CC mark. Page published on Jul 19 2013.
The Elithion brand and the 'ə' (upside down 'e') logo are Trademarks of Elithion LLC. Graphic design by morninglori

 

In this page: