Elithion Lithiumate manual - Cell board installation

	Index Quick 1: Plan 2: Install 3: Set-up 4: Test Reference Help Forum
	index install cellboard_install Cell board installation Installation of cell boards You MUST disconnect the battery from EVERYTHING else before installing a cell board. Use a safety disconnect to open the battery circuit. A cell board WILL be damaged if installed to a battery that is still connected to a load or a charger. A cell board WILL be damaged if connected backwards to a cell, even for a split second. If a cell board is damaged, discard it. A DAMAGED CELL BOARD WILL DRAIN ITS CELL! Small cylindrical, single Small cyl, side-by-side, full Small cyl, side-by-side, split Small cyl, column, full Small cyl,, column, split Large cylindrical Prismatic Pouch, single Pouch, multiple Comm. harness Shielded comm. cable

© 2008~2012 Elithion™, LLC. All rights reserved, except where noted by CC mark. Handcrafted on 12/11/09 by Davide, graphic design by morninglori
The Elithion brand and the 'ə' (upside down 'e') logo are Trademarks of Elithion LLC.
Contact us

Search this site

You MUST disconnect the battery from EVERYTHING else before installing a cell board.

Use a safety disconnect to open the battery circuit.

A cell board WILL be damaged if installed to a battery that is still connected to a load or a charger.

A cell board WILL be damaged if connected backwards to a cell, even for a split second.

If a cell board is damaged, discard it.

A DAMAGED CELL BOARD WILL DRAIN ITS CELL!